{"id":828,"date":"2020-06-15T17:37:40","date_gmt":"2020-06-15T09:37:40","guid":{"rendered":"http:\/\/192.168.1.137\/en\/?page_id=828"},"modified":"2020-06-15T17:37:40","modified_gmt":"2020-06-15T09:37:40","slug":"skp-c32hl","status":"publish","type":"page","link":"https:\/\/en.loover.com.tw\/en\/index.php\/products\/medium-low-torque-electric-screwdriver\/skp-c32hl\/","title":{"rendered":"SKP-C32HL"},"content":{"rendered":"
    \n
  1. 1.Auto detect missing screw, screw stripped, floating lock and wrong choosing of screw<\/li>\n
  2. 2.Selectable, auto-reset or manual reset<\/li>\n
  3. 3.The most complete function system such as the setting for SL, SC, RC auto reply the output timing AT, LT, HT, LL. This is the most professional design and choice.<\/li>\n
  4. 4.Slow-start r.p.m can adjust the original r.p.m\u2019s 60%~100% by slow-start speed knob.<\/li>\n
  5. 5.Auto-Learning function, to measure the time for screw fastening, is convenient when the users simulate the time of the screw fastening for the special screws.<\/li>\n
  6. 6.Expanding 5 sets data memory. The users can choose single set to operate or 5 sets to operate cyclically like as one screwdriver used as 5 in 1. It\u2019s the best choice of screws counter.<\/li>\n
  7. 7.Displaying the quantity of unfinished or fastened screws, and the users can add external sensor switch to avoid any mistake from shortage of screw fastening. And it is able to prompt user automatically while the fastening job is done as setting. Screw counting is also able to connect external devices.<\/li>\n
  8. 8.Setting output input signal (Open Collector) such function is suitable for semi or full automatic. Production line and function for contact point of relay, to prevent operator from improper operation. And make an accurate calculation by signal of sensor.<\/li>\n
  9. 9.Enable to connect with external PLC system to make production line humanistic. Calculate the screws numbers which must be fastened by computer to avoid any unnecessary neglect of screw fastening.<\/li>\n<\/ol>\n\n\n\n
    <\/td>\n<\/td>\n<\/tr>\n
    <\/td>\n <\/td>\n<\/tr>\n<\/table>\n

    Product Spec<\/h4>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
    Model<\/td>\nSKP-C32HL<\/td>\n<\/tr>\n
    Input Volage<\/td>\nAC 110V~240V 50\/60Hz<\/td>\n<\/tr>\n
    Output Volage<\/td>\nDC32V\/24V 3A\/1.8A<\/td>\n<\/tr>\n
    Power Consumption<\/td>\n60W<\/td>\n<\/tr>\n
    Count<\/td>\n1~99<\/td>\n<\/tr>\n
    Count method<\/td>\nCount-up\/Count-down<\/td>\n<\/tr>\n
    Work with Sensor<\/td>\nON\/OFF<\/td>\n<\/tr>\n
    GATE Sensor<\/td>\nON(2Sensor)\/OFF(1Sensor)<\/td>\n<\/tr>\n
    Slow-start time adjustable<\/td>\n0~9.9 seconds<\/td>\n<\/tr>\n
    Slow-start speed adjustable<\/td>\nRated Speed(60%~100%)<\/td>\n<\/tr>\n
    Running Time limit-LO<\/td>\n0.01~9.99 Seconds<\/td>\n<\/tr>\n
    Running Time limit-HI<\/td>\n0.1~9.9 Seconds<\/td>\n<\/tr>\n
    Reminger Mode<\/td>\nON\/OF\/FF\/EF with L<\/td>\n<\/tr>\n
    Auto ZERO<\/td>\nON\/OFF<\/td>\n<\/tr>\n
    External inputs<\/td>\nSensor\/Reset<\/td>\n<\/tr>\n
    External outputs<\/td>\nOK\/NG\/OK all<\/td>\n<\/tr>\n
    Screwdriver Control<\/td>\nSpeed\uff1aHI\/LO\uff1bSlow-Star<\/td>\n<\/tr>\n
    Outside Dimensions<\/td>\n150X48X130(mm)<\/td>\n<\/tr>\n
    Weight(Kg)<\/td>\n0.9<\/td>\n<\/tr>\n
    Accessories<\/td>\nPower cordX1 Suspension bailX2 Terminal BlockX1<\/td>\n<\/tr>\n
    Remark<\/td>\n<\/td>\n<\/tr>\n
    Applicable Models<\/td>\nSKD-C2000 Series, SKD-C5000 Series,\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0\u00a0 SKD-C7000 Series, SKD-C8000 Series,<\/td>\n<\/tr>\n<\/table>\n


    \n